Ultra Barrier Silver Beer Line

Discussions about brewing equipment / design.

Re: Ultra Barrier Silver Beer Line

Postby MikeB » Sun Dec 04, 2016 8:49 am

I would take 10ft


Sent from my iPhone using Tapatalk
User avatar
MikeB
 
Posts: 71
Joined: Wed Apr 13, 2016 8:41 pm

Re: Ultra Barrier Silver Beer Line

Postby Matt F » Mon Dec 05, 2016 8:59 am

I will take 20'.
Matt Franklin
Slappy Brewing North

On Tap:
Saison
Liquid Weed NEIPA
Dubbel Bubble
Cashmere Kitten IPA (Cashmere single hop)
User avatar
Matt F
 
Posts: 3429
Joined: Mon Feb 13, 2006 9:09 pm
Location: Cedar Rapids, IA

Re: Ultra Barrier Silver Beer Line

Postby Eric B » Mon Dec 12, 2016 8:08 pm

I will have a sign-up for this at the next meeting. Order shortly after.
Eric Benda
Eric B
 
Posts: 169
Joined: Tue Apr 21, 2015 10:17 am

Re: Ultra Barrier Silver Beer Line

Postby brianhall1024 » Mon Dec 12, 2016 8:09 pm

Probably wont be at the next mtg
User avatar
brianhall1024
 
Posts: 543
Joined: Fri Jun 04, 2010 5:23 pm
Location: Cedar Rapids, IA

Re: Ultra Barrier Silver Beer Line

Postby czubak » Tue Dec 20, 2016 7:28 am

Yeah I need 6' if we do this again.
Chris Zubak
User avatar
czubak
 
Posts: 900
Joined: Thu Feb 06, 2014 9:12 am
Location: SW CR

Re: Ultra Barrier Silver Beer Line

Postby mjensen52402 » Tue Dec 20, 2016 9:28 am

If we are going to do "something special" for Club night at NHC will we need tubing to make our "adjustments".
mjensen52402
 
Posts: 282
Joined: Thu Feb 17, 2011 9:18 pm
Location: Cedar Rapids, IA

Re: Ultra Barrier Silver Beer Line

Postby wyzzyrdd » Tue Dec 20, 2016 11:35 am

I will buy some. Haven't decided how much yet.
Pat McCusker
wyzzyrdd
 
Posts: 305
Joined: Thu Sep 03, 2015 7:06 pm

Re: Ultra Barrier Silver Beer Line

Postby Eric B » Tue Mar 07, 2017 5:54 pm

So this got kind of lost in the dirt. I will have a sign-up next meeting for this.
Eric Benda
Eric B
 
Posts: 169
Joined: Tue Apr 21, 2015 10:17 am

Re: Ultra Barrier Silver Beer Line

Postby UndeadFred » Fri Mar 10, 2017 8:58 am

I might be talked into a 10' piece to try it. I usually uses LDPE lines, but it would be interesting to see how much better this stuff is, or for an eventual "portable" setup, which I still want to do.
User avatar
UndeadFred
 
Posts: 259
Joined: Fri Feb 20, 2015 12:07 pm

Re: Ultra Barrier Silver Beer Line

Postby jjpeanasky » Sun Feb 11, 2018 8:37 am

Bringing this bad boy to life. I'm going to order a 100ft roll of this stuff. I sent off an email to BIY to see if they can get it in. Otherwise I'll be ordering online. Looks to be around $131.80 for a roll. I'll be keeping 40ft for myself, but any extra I'd be willing to split out for people.
User avatar
jjpeanasky
 
Posts: 244
Joined: Fri Jan 29, 2016 5:37 am

Re: Ultra Barrier Silver Beer Line

Postby daryl » Sun Feb 11, 2018 9:01 am

I would take 24'. I am assuming that in these parts, 6' per tap is a good length to use?

I do not mind if the beer pours a little slow....just not all head.
In the Fridge/On Tap: Salted Caramel Porter
In the barrel/conditioning:
In the bucket: P-nut Brittle Ale, Blueberry and Blk Rasp. Mead; Tangerine Wheat; Spont. Funk; Swarthy Beagle
In the queue: Pils Urquell Clone, Traditional Irish Red Ale
User avatar
daryl
 
Posts: 996
Joined: Thu Jan 16, 2014 11:07 pm
Location: Springville, IA

Re: Ultra Barrier Silver Beer Line

Postby karl » Sun Feb 11, 2018 11:14 am

I could use 21 feet. (I run 7 feet per line at 13 psi.) I could perhaps get some extra to have on the shelf for future replacements if there were any unclaimed.

Sent from my Pixel XL using Tapatalk
On Tap at the Laughing-Kitten Basement-Pub:
Unnamed single-hop (challenger) British bitter v1
Unnamed Dunkles Weissbier v1
Accursed Quad
Cidre Normande
On deck/fermenting:
Unnamed Czech pale lager v1
User avatar
karl
 
Posts: 279
Joined: Tue Feb 14, 2006 5:09 pm

Re: Ultra Barrier Silver Beer Line

Postby andrewmaixner » Sun Feb 11, 2018 3:28 pm

daryl wrote:I would take 24'. I am assuming that in these parts, 6' per tap is a good length to use?
I do not mind if the beer pours a little slow....just not all head.

I went with 10-11 feet per line, rolled up and zip tied. No issues, pours great. No reason to save $10 and be frustrated for the next 5 years.
User avatar
andrewmaixner
 
Posts: 570
Joined: Mon Jul 14, 2014 10:26 am

Re: Ultra Barrier Silver Beer Line

Postby tony b » Sun Feb 11, 2018 3:47 pm

I'd take a 10 ft piece.

One of these days, I might actually finish my tap fridge! :lol:
A Mighty Wind's A Brewing

“Life is short - break the rules, forgive quickly, kiss slowly, love truly, laugh uncontrollably, and never regret anything that made you smile” ― Mae West
User avatar
tony b
 
Posts: 2326
Joined: Mon Nov 19, 2007 5:13 pm
Location: CR, IA

Re: Ultra Barrier Silver Beer Line

Postby daryl » Sun Feb 11, 2018 3:54 pm

andrewmaixner wrote:
daryl wrote:I would take 24'. I am assuming that in these parts, 6' per tap is a good length to use?
I do not mind if the beer pours a little slow....just not all head.

I went with 10-11 feet per line, rolled up and zip tied. No issues, pours great. No reason to save $10 and be frustrated for the next 5 years.


What PSI are you using to push beer?
In the Fridge/On Tap: Salted Caramel Porter
In the barrel/conditioning:
In the bucket: P-nut Brittle Ale, Blueberry and Blk Rasp. Mead; Tangerine Wheat; Spont. Funk; Swarthy Beagle
In the queue: Pils Urquell Clone, Traditional Irish Red Ale
User avatar
daryl
 
Posts: 996
Joined: Thu Jan 16, 2014 11:07 pm
Location: Springville, IA

PreviousNext

Return to Equipment

Who is online

Users browsing this forum: No registered users and 1 guest